Catalog Products » Protein Isolation and Analysis » Protein Isolation and Purification » Protein Purification Resins » Protein G Resin FF Prepacked Column

Protein G Resin FF Prepacked Column

Description GenScript Protein G Resin FF is an affinity chromatography medium designed for easy, one-step purification of classes, subclasses and fragments of immunoglobulins from biological fluids and from cell culture media. The recombinant protein G ligand is coupled to 4% highly cross-linked agarose. The static binding capacity of Protein G Resin FF is greater than 20 mg human IgG/ml settled resin. The dynamic binding capacity will vary depending on several factors such as target antibody, flow rate etc. Table 1 lists the characteristics of Protein G Resin FF Prepacked Column.

Protein G, a bacterial cell wall protein isolated from group G Streptococci, binds to mammalian IgGs mainly through Fc regions. Native protein G has 3 IgG binding domains and also sites for albumin and cell-surface binding. The latter have been eliminated from recombinant protein G to reduce nonspecific binding. Although protein G has very similar tertiary structures to protein A, their amino acid compositions differ significantly, resulting in different binding characteristics. Protein G can be used for purification of mammalian monoclonal and polyclonal IgGs that do not bind well to protein A. Protein G has greater affinity than protein A for most mammalian IgGs, especially for certain subclasses including human IgG3, mouse IgG1 and rat IgG2a. Unlike protein A, protein G does not bind to human IgM, IgD and IgA.

Cat. No.Product Name Volume supplied Resin content
L00681-12Protein G Resin FF (1mlx2)1mlx250% slurry
L00681-51Protein G Resin FF (5mlx1)5mlx150% slurry
L00681-55Protein G Resin FF (5mlx5)5mlx550% slurry

Storage Store in 20% ethanol at 2°C to 8°C. Do not freeze.
LigandRecombinant Streptococcal protein G lacking the albumin-binding sites expressed in E. coli
Number of IgG binding sites per ligand3
M.W. of ligandApproximately 22 kDa
PI of ligand4.69
Degree of substitutionApproximately 2 mg protein G/ml settled resin
Static binding capacity≥ 20 mg human IgG/ml settled resin
Matrix spherical4% highly cross-linked agarose
Average particle size90 μm (45-165 μm)
Recommended flow rate 50-300cm/h
Storage solution20% ethanol
Storage and Stability18 months when stored unopened at 2-8 °C

Column compatibility
The 5 mL and 1 mL columns are compatible with ÄKTA™ chromatography systems. Additional adaptors may be needed for other systems. The optimal flow rate is 1 mL/min for the 1 mL column, and 5 mL/min for the 5 mL column. For preserving the column integrity, please do not exceed a flow rate of 4 mL/min for the 1 mL column and 15 mL/min for the 5 mL column (The mobile phase of the test is aqueous buffers at room temperature and the alarm pressure is 0.3 MPa).

Storage Store in Binding/Wash Buffer containing 20% ethanol at 2°C to 8°C. Do not freeze.

Notice there is no results found, you can visit "Citations Database" for other results.

For more documents, please visit "Technical Support".

Cat. No. L00681
5 ml x 5 $3410.00
5 ml x 1 $761.00
1 ml x 2 $411.00